The compensator specification model parameter sheet can vary according to different types and manufacturers, but it usually includes some basic specification parameters, such as model, size, pipe diameter, working pressure, working temperature, etc. The following is an example of a steam pipe compensator (particularly square compensator) specification model parameter table based on the information in the reference article, presented in the form of point representation and induction:
Square Compensator Specification Model Parameter Table
| model | Size (mm) | Pipe diameter (mm) | Operating pressure (Mpa) | Operating temperature (°C) |
|---|---|---|---|---|
| KXT-32 | 250×250 | 32 | 0.6/1.0 | ≤400 |
| KXT-40 | 280×280 | 40 | ||
| KXT-50 | 300×300 | 50 | ||
| KXT-65 | 350×350 | 65 | ||
| KXT-80 | 400×400 | 80 | ||
| KXT-100 | 450×450 | 100 | ||
| KXT-125 | 500×500 | 125 | ||
| KXT-150 | 550×550 | 150 | ||
| KXT-200 | 650×650 | 200 | ||
| KXT-250 | 700×700 | 250 | ||
| KXT-300 | 800×800 | 300 | ||
| KXT-350 | 900×900 | 350 | ||
| KXT-400 | 1000×1000 | 400 |
Attention：
The operating pressure and operating temperature parameters in the table above are not listed under some models because the reference article does not provide complete information. In practical applications, these parameters are key factors to consider when selecting a compensator.
The dimensions of a square compensator (e.g. 250×250, 300×300, etc.) usually refer to its external profile dimensions, which are used to determine the installation space and location of the compensator in the pipeline system.
Pipe diameter refers to the diameter of the steam pipe connected with the compensator, which is an important basis for selecting the compensator model.
Operating pressure and operating temperature are the limiting conditions that the compensator can withstand, and exceeding these conditions may lead to damage or failure of the compensator.
In addition, there are other types of steam pipe compensators, such as metal corrugated compensators, sleeve compensators, spherical compensators, etc. Their specification and model parameter sheets will vary. When selecting and using, it needs to be comprehensively considered according to the specific pipeline system requirements and working conditions.
The above information is for reference only. Please call or WeChat for specific specifications, models and parameters, so that we can provide technical specifications.